Light Bulb: Removal & Replacement - Vax Turbo Force Ultra V-006U Instruction Manual

Vax V-006 D5 BF 7/1/05 12:13 PM
Rotating Brushbar & Filter: Removal & Replacement/Light Bulb Removal & Replacement
Fig.7/1
2. Lift the nozzle guard (Fig.7/2).
Fig.7/2
3. Lift and remove the brushbar and dispose of the
belt (Fig.7/3).
Fig.7/3
To Replace the Belt or Brushbar
1. Slide the belt onto the motorshaft (Fig.7/4). Then
slide the brushbar into the belt.
Fig.7/4
2. Place the new belt in the area of the brushbar
without bristles (Fig.7/5).
Fig.7/5
Page 9
3. With the new belt in place, pull and slide the
brushbar into the nozzle, making sure that the
end caps are in the correct orientation (Fig.7/6A).
Rotate the brushbar manually to make sure the
belt is properly aligned (Fig.7/6).
A
Fig.7/6
4. Re-attach the nozzle guard (Fig.7/7)
Fig.7/7
5. Replace all five (5) screws to secure the nozzle
guard (Fig.7/8).
Fig.7/8
8. Light Bulb: Removal &
Replacement
(V-006/V-006B/V-006N only)
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
Tool required: Phillips screwdriver.
1. Unplug the vacuum cleaner. Lean the cleaner
handle back and remove the two (2) screws
located on either side of the headlight lens
(Fig.8/1).
9