Valcom IP Solutions VIP-483 User Manual

Vandal Resistant IP FlexHorn
INTRODUCTION
The VIP-483 Vandal Resistant IP FlexHorn
enables loudspeaker voice paging anywhere on
an Ethernet network. The VIP-483 consists of a
high efficiency Class-D Horn and a Network
Interface, allowing stand alone capability when
used with a SIP telephone system or can be
accessed from a variety of Valcom managed
VoIP products. Power is provided to the VIP-483
via a Power over Ethernet (PoE) switch meeting
the 802.3af specification.
SPECIFICATIONS
Access Methods

SIP telephone system

PBX, FXO Port w/VIP-811

POTS telephone set w/VIP-811

PBX, FXS Port w/VIP-821

Valcom M Cast Page Group
Features

RJ-45 for network connection

Network activity LEDs

Power over Ethernet (PoE) 802.3af
compatible

Vandal Resistant stainless steel faceplate
Dimensions/Weight

8.5" H x 11.0" W x 4.25" D
(21.6cm H x 27.9cm W x 10.8cm D)

Weight: 3.5 lbs. (1.6 kg)
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Environment
Temperature:
Humidity:
VIP-483
Class 3
0 to +40° C
0 to 85% non-precipitating
Packing List
Qty
1
1
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electric shock,
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
1
Item
VIP-483 IP FlexHorn
VSP Document
DO NOT OPEN
Do not remove cover.
947349
Issue 3