Valcom VIP-480AL-SA Manual

Valcom VIP-480AL-SA Manual

Syn-apps compliant ip one-way flexhorn

Advertisement

SPECIFICATIONS
Access Methods
Syn-Apps server
SIP-enabled telephone system
Features
RJ-45 for network connection
LED Status Indicator
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
Horn
6.8" H x 8.3" W x 3.3" D
(17.3 cm) x (21.1 cm) x (8.4 cm)
Weight: 2.10 lbs. (0.95 kg)
Network Interface
1.62" H x 5.63" W x 3.45" D
(4.11 cm) x (14.30 cm) x (8.73 cm)
with brackets – 8.22" W (20.87 cm)
Weight: 2.10 lbs. (0.95 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
Environment
Network Interface
Temperature:
Humidity:
Horn:
Suitable for indoor or outdoor installation
These products are intended for use with a UL
Listed power source marked "Class 2" or "LPS"
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
VIP-480AL-SA
Syn-Apps® Compliant
IP One-Way Flexhorn
Class 3
0 to +40° C
0 to 85% non-precipitating
Precautionary Designations
WARNING-To Reduce The Risk Of Fire Or
Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.
AVERTISSEMENT - Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système à la
pluie ou à l'humidité.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
L'appareil ne doit pas être exposé à des
égouttements et éclaboussures et aucun
Objet Rempli de liquide, comme vase, ne
doit être placé sur l'appareil.
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses and can radiate radio
frequency energy and if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment
in a residential area may cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
1
Issue 1
Issue 1
947567

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIP-480AL-SA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Valcom VIP-480AL-SA

  • Page 1 Issue 1 Issue 1 VIP-480AL-SA Syn-Apps® Compliant IP One-Way Flexhorn SPECIFICATIONS Access Methods  Syn-Apps server  SIP-enabled telephone system Features  RJ-45 for network connection  LED Status Indicator Precautionary Designations  Network activity LEDs  WARNING-To Reduce The Risk Of Fire Or ...
  • Page 2: Installation

    Power Connections Ne pas utiliser cet appareil près de l'eau. 6. Clean only with dry cloth. The only method of powering a VIP-480AL-SA Nettoyer avec un chiffon sec. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s Network Interface is via a Power over Ethernet instructions.
  • Page 3: Technical Assistance

    Setup TECHNICAL ASSISTANCE The VIP-480AL-SA will automatically acquire an Assistance in troubleshooting is available from the IP address (using DHCP) and connect to the factory. Call (540) 563-2000 and press 1 for Syn-Apps server when connected to the network Technical Support or visit our website at and powered up.
  • Page 4 NETWORK 350' MAXIMUM DISTANCE INTERFACE NETWORK CONNECTION FLEXHORN Figure 1 NETWORK 350' MAXIMUM DISTANCE INTERFACE RJ-45 NETWORK CONNECTION TYPICAL 568B RJ-45 JACK RJ45 FLEXHORN BROWN BROWN BROWN WHITE/BROWN WHITE/BROWN GREEN GREEN WHITE/GREEN WHITE/GREEN ORANGE ORANGE CAT 3/5/6 WHITE/ORANGE WHITE/ORANGE BLUE BLUE WHITE/BLUE WHITE/BLUE...
  • Page 5: Other Mounting Options

    UNIVERSAL BRACKET SURFACE MOUNTED WITH A UNIVERSAL BRACKET WITH CLAMP UNIVERSAL MOUNTING BRACKET "C" CLAMP FOR "I" BEAM MOUNTING ATTACH CLAMP TO HORN ATTACH FLEXHORN TO BEAM FLUSH MOUNT USING MOUNTING SCREWS: FLUSH MOUNTING IN A STUD WALL USING THE TEMPLATE, MARK LOCATION OF INSTALLED WITH MOUNTING SCREWS OPENING AND MOUNTING HOLES ON WALL.

Table of Contents