INTRODUCTION
The VIP-130AL IP PoE One-Way Horn is a self
contained paging system which enables voice
paging over an IP network. The VIP-130AL
consists of a high efficiency horn and a Network
Interface allowing stand alone capability when
used with a SIP telephone system or can be
accessed from a variety of Valcom managed
VoIP products. The VIP-130AL is available in
three colors, Beige (-BGE), Gray (-GY) and Marine
White (-W). The Marine version features additional
weather protection.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP telephone system
Features
RJ-45 network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
O-ring seal on bell housing (Marine model
only)
Stainless steel hardware (Marine model only)
Dimensions/Weight
Horn - 7.38" H x 10.0" W x 10.4" D
(18.75cm x 25.4cm x 26.42cm)
Weight: 5.60 lbs. (2.54 kg)
Network Interface
1.62" H x 5.63" W x 3.45" D
(4.11 cm) x (14.30 cm) x (8.73 cm)
with brackets – 8.22" W (20.87 cm)
Weight: 2.10 lbs. (0.95 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
VIP-130AL
IP PoE ONE-WAY HORN
Class 3
1
Environment
Network Interface:
Temperature:
Humidity:
PSE:
(Power Sourcing Equipment) to be
compliant to IEEE 802.3af
Horn:
Temperature:
Humidity:
Packing List
Qty
Item
1
Network Interface
1
VIP-130AL Horn
1
VSP Document
INSTALLATION
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Issue 3
0 to +40° C
0 to 85% non-precipitating
-20 to +55° C
0 to 95% non-condensing
947812