Advertisement
Quick Links
VIP-480L IP Paging Horn
INTRODUCTION
The VIP-480L IP Paging Horn is a self contained
paging system which enables voice paging up to
1200 feet from an Ethernet connection. The
VIP-480L consist of a high efficiency 3 Watt
Class-D Horn and a VIP-LLE Network Extender
allowing stand alone capability when used with a
SIP Phone System or can be accessed from a
variety of Valcom managed VoIP products.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP telephone system
Features
RJ-45 network connection
LED Status Indicator
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
High Efficiency Class-D 3 Watt Amplifier
Dimensions/Weight
(HORN)
6.8"H x 8.3"W x 3.3" D
(17.3cm H x 21.1cm W x 8.4cm D)
2.1 lbs. (0.95 kg)
Network Extender
(VIP-LLE)
1.30" H x 6.10" W x 6.00" D
(3.51 cm H x 15.72 cm W x 13.51 cm D)
Weight: 0.85 lbs. (0.39 kg)
Nominal Specifications – HORN
Input Impedance:
Input Level:
Nominal Specifications – VIP-LLE
Via 802.3af PoE Ethernet Switch:
Environment
Temperature:
Humidity:
Packing List
Qty
1
VIP-LLE Network Extender
1
3 Watt High Efficiency Horn
1
2
1
4
4
1
1
Class 3 (12.95W)
0 to 85% non-precipitating
Item
VSP Document
Mounting Brackets
VIP Quick Start Guide
Rubber Pads
Wood Screws
"C" Clamp
947630
ISSUE 4
600 Ohms
-10dBm
0 to +40° C
Advertisement
Related Manuals for Valcom VIP-480L
Summary of Contents for Valcom VIP-480L
- Page 1 ISSUE 4 VIP-480L IP Paging Horn INTRODUCTION The VIP-480L IP Paging Horn is a self contained paging system which enables voice paging up to 1200 feet from an Ethernet connection. The VIP-480L consist of a high efficiency 3 Watt Class-D Horn and a VIP-LLE Network Extender...
-
Page 2: Installation
Interconnections Do not remove cover. No user serviceable parts inside. The only method of powering a VIP-480L IP Refer servicing to qualified service personnel. Paging Horn is via a Power over Ethernet (PoE) switch or power injector meeting the 802.3af This symbol indicates that dangerous specification. -
Page 3: Technical Assistance
VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1. - Page 4 There are two versions of the VIP-LLE. Refer to the diagram below that corresponds to the version being installed. Note: The screw terminals are removable. Gently lift away from the circuit board to remove. Make the necessary wire connections, then replace the screw terminals over the pins Paging Horn RJ45 on circuit board.
- Page 5 UNIVERSAL BRACKET SURFACE MOUNTED W ITH A UNIVERSAL BRACKET WITH CLAMP UNIVERSAL MOUNTING BRACKET "C" CLAMP FOR "I" BEAM MOUNTING ATTACH CLAMP TO HORN ATTACH FLEXHORN TO BEAM FLUSH MOUNT USING MOUNTING SCREWS: FLUSH MOUNTING IN A STUD W ALL USING THE TEMPLATE, MARK LOCATION OF INSTALLED W ITH MOUNTING SCREWS OPENING AND MOUNTING HOLES ON W ALL.