Functional Button - UNI-T UT60F Operating Manual

Functional Button(1)

Below table indicated for information about the functional
button operations.
Button Measuring
F u n c t i o n
Display
Backlight
V
(BLUE)
A
(UT60F
ONLY)
mA
Any rotary
RANGE
Switch
Position
Model UT60F/G: OPERATING MANUAL
Operation Performed
Press once to turn the Display
Backlight on and it shall shut off
automatically in around 60 seconds
later.
Switches between AC and DC
Voltage; the Meter beeps. DC is
default.
Switches between continuity and
diode and resistance
measurement;
The Meter beeps.
Resistance is default.
Switches between AC and DC
current range from 0.1 A to
4.000mA; the Meter beeps. DC
is default
Model UT60F: Switches between
AC and DC current measurement
range from 0.01mA to 400.0mA;
the Meter beeps. DC is default.
Model UT60G: Switches between
AC and DC current measurement
range from 0.01mA to 600.0mA ;
the Meter beeps. DC is default.
1.Press RANGE to enter the
manual ranging mode; the Meter
beeps.
Manually selecting a range
causes the Meter to exit the
Hold mode.
2.Press RANGE to step through
the ranges available for the
selected function; the Meter
beeps.
3.Press and hold RANGE for over
1 second to return to autoranging;
the Meter beeps.
11