TYAN Tempest i5400XT S5396 User Manual page 47

Memory Branch Mode
This option is used to select the type of memory operation mode.
Sequential / Interleave / Mirror / Single Channel 0
Branch 0/1 Rank Sparing
This option is used to enable/disable Branch 0 rank/DIMM sparing feature.
Disabled / Enabled
Enhanced x8 Detection
This feature is used to enable/disable enhanced x8 DRAM UC error detection.
Disabled / Enabled
Force ITK Config Clocking
This feature is used to enable/disable FBD configuration for ITK test suite.
Disabled / Enabled
High Precision Event Timer:
This feature is used to enable/disable Multimedia Timer support.
Disabled / Enabled
Snoop filter
This item is used to enable the snoop filter.
Enabled / Disabled
3.3.3.1 Intel VT for Directed I/O (VT-d)
Enable/Disable Intel Virtualization Technology for Directed I/O (VT-d) by
reporting the I/O device assignment to VMM through DMAR ACPI tables
Main Advanced
Intel VT for Directed I/O (VT-d) [Disabled]
VT-d for Port0 (ESI)
VT-d for Port1
VT-d for Port5
VT-d for Port9
VT-d for DMI Port
↑↓
F1 Help
← →
Esc Exit
PhoenixBIOS Setup Utility
Security
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Item -/+
Select Menu Enter
http://www.tyan.com
TPM State Power
Change Values
Select
Sub-Menu
47
Boot
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Exit