Table of Contents
Advertisement
3.
Lift the metal cover to expose the socket interior and place the socket in as shown.
4.
Close the cover and return the locking lever to its locked position.
5.
Repeat this procedure for the second processor socket.
6.
Turn the board upside down and insert the heat sink spring mechanism as shown.
The heat sink spring may be already pre-installed by the manufacturer.
7.
Turn the board the right way up again and screw the heat sink into place.
8.
Repeat this procedure for the second processor.
24
http://www.tyan.com
Pin 1
Hide quick links:
Advertisement
Table of Contents
