Menu Edit - TurboChef ENCORE Owner's Manual

16 EdIT MOdE

Menu Edit

Go to the "recipe Edit" screen (above) to change the
food group name, food item name, and cook settings.
1. Place the oven in Edit Mode (see page 15).
2. Select "EDIT temp 1 GrouPS" or "EDIT
temp 2 GrouPS."
3. Select the group that contains the item you
want to edit.
4. Select the food item you want to edit.
5. Change the food group or food item name.
a. See the above illustration for instructions.
6. Change the cook settings:
a. See the above illustration for instructions.
b. % Time
event. The sum of all events must be 100.
c. % Air
The more air, the more the product will
L1
brown or crisp. % Air can be set from
L2
10-100% in 10% increments.
d. % Wave
L3
and can be set from 0-100% in 10% increments.
L4
For example, 50% means the microwave system
will remain on for five continuous seconds for
every ten seconds during the cook cycle.
LUNCH
EVNT
COOK TIME = 00:35
Move cursor back and
forth between fields
can be set from 0-100% for each
determines the amount of airflow.
determines the amount of microwave,
Move cursor back and
forth between characters
A
%Time %Air %Wave
1 050 070 050
2 050% 060 050
3 000 010 000
4 000 010 000
5 000 010 000
6 000 010 000
TOTAL = 100%
500F (116F : 373F)
= Set point (CC actual : Ir actual)
7. Set the cook time. The maximum allowable cook
time is 10:00.
8. If desired, select "Cook" to perform a test cook.
NoTE: The oven may require additional warm-
up time before a test cook can be performed.
9. Select "Save" to save changes.
10. When all editing is complete, return to the
options screen and turn off the Edit Mode (see
page 11). This will allow access to the regular
cook mode.
R1
R2
R3
R4
SAVE
TIME
COOK
change a letter or number
use number keys to