Entering Bar Code Data - Brother PT-2700 User Manual

Attribute
Protocol
Width
Under#
(characters printed
below bar code)
C.Digit
(check digit)

Entering Bar Code Data

1
Press the
"Bar Code Input" using the
press the
The Bar Code Input screen is displayed.
• Up to five bar codes can be entered in a label.
• Pressing
will also allow you to go to "Bar Code Input".
2
Type in the bar code data.
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
EAN128 protocols. When not using special characters,
go to step 5.
3
Press the
A list of characters available for the current protocol is
displayed.
4
Select a character using the
the or key to insert the character in the bar code
data.
Bar Code Settings
CODE39, CODE128, EAN8, EAN13, EAN128,
UPC-A, UPC-E, I-2/5 (ITF), CODABAR
(only available for the CODE39, I-2/5
key to display the Setup menu, select
or
or key.
key while holding down
key.
or
Value
Large
Small
On
Off
Off
On
and CODABAR protocols)
keys, and then
key
keys, then press
Creating a Bar Code Label
1
2
3
4
5
6
7
8
9
55