Bissell ProHeat Protech BS-7920F Troubleshooting Manual page 18

Solution 2:
Is the red lint basket stuck in the motor duct (the hole with a black rubber rim on the right hand side)?
Is there suction at the motor duct (the hole with a black rubber rim on the right hand side)?
Are the small rounded window tabs on the Floor Nozzle out of their mating slots and
inadvertently lifting the tank up out of place?
No, switch the diverter knob back and forth from 'Floor
Cleaning' to 'Tools or Pretreat' a couple of times. Does
the diverter door click open and closed properly?
No, does diverter door seem to
be damage/broken?
No, proceed to solution 3
Prepared by Monique Lania
Remove the tank-in-tank assembly from the unit
No
Yes
Yes, refer customer to an Authorised Service Centre
Yes, refer customer to an Authorised Service Centre
Yes, Remove and place in its place in lid of tank-
in-tank assembly. **If it can not be removed, refer
to authorized service centre
No, refer customer to an Authorised service centre
No, refer customer to an authorized
service centre
18
Call Servicing Guide ProHeat Protech 7920F