Consumer States No Or Low Suction - Bissell ProHeat Protech BS-7920F Troubleshooting Manual

Consumer states no or low suction

Solution 1:
Remove tank-in-tank assembly from unit. Is the lid or tank damaged?
No
Is the red lint basket located in tank
lid damaged of full of debri?
No, proceed to solution 2
Prepared by Monique Lania
Is the tank full of dirty water on the outside of the bladder.
No
Yes, remove red lint basket and rinse in hot (not boiling) tap water,
clean using finger tip or an old tooth brush. Replace securely in its
hole in tank lid, ensuring it is not upside down.
Lift and push tank lid handle forward and place lid back on tank.
Ensure lid is sitting securely on tank. Pull tank handle backward to
secure. Is there suction now?
No, proceed to solution 2
Yes, Empty tank and refill with clean hot (not
boiling) tap water, problem solved
Yes, advise customer to call Bissell Free
Call 1800 number again and press Option 3
for spare parts and order replacement Tank-
in-Tank Assembly
17
Call Servicing Guide ProHeat Protech 7920F
Yes, problem solved