Table of Contents
Advertisement
2
INSTALLING YOUR PHONE
2.1
Connecting the base station
1. Plug the power supply and the
telephone line cord into the base.
2. Plug the other end of the power adapter
into a suitable 230Vac mains socket,
and the line cord into your telephone line socket.
3. Use only the power adapter and telephone
line cord supplied.
2.2
Installing and charging the batteries
1.
Place the 2 supplied batteries into the battery
compartment with the polarity markings as shown
Use only the NiMH rechargeable battery type provided.
Position the battery compartment cover over the
2.
batteries and slide up to click into place.
Put the handset on the base and charge for
3.
15 hours before using the handset for the first time.
The handset will give a beep when it is properly
placed on the base or charger.
2.3
Installing and charging the wireless headset
1. Attach the ear hook to the headset body as
indicated, for either left or right ear operation,
according to your preference.
2. Put the wireless headset on the base
cradle for charging before using. The
LED on the headset will light red when
it is first placed
light blue when it
Note: The headset battery is not a user-accessible or replaceable part.
If you have a Broadband line
If you connect your telephone to a line with
a broadband connection, you will need to
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the
broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
on the charger,
and will
is fully charged.
5
5
Right ear:
Left ear:
Hide quick links:
Advertisement
Table of Contents
