Remote Operation - Binatone iDECT Freedom Twin User Manual

8.5.8.3 Access Your Answering Machine Remotely
You can ring your phone from another tone-dialling phone to switch the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialling phone to your phone.
2. When the answering machine answers the call and starts playing the OGM,
press the <*> key. The OGM will stop playing
3. Enter the 4-digit Remote Access PIN (default PIN is 0000). You will hear a
single beep if the PIN is accepted, and you will need to press 5 to start
playing any messages. If the PIN is not accepted you will hear a triple error
beep, and you will need to enter the PIN again.
Note: The * must be entered while the OGM is still playing, and the 4-digit PIN
should be follow without any delays.
Note: If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function.
Freedom System

Remote operation

1
Using a tone-dialling phone, dial your home number
2
While your outgoing message is playing, press
3
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 8.5.8.1 on page 32.
Note: The <*> key must be entered while the OGM is still playing, and the 4-digit
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times consecutively, the line will be released
automatically.
4
You can also use the codes on the other side of this card
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
33