Alarm Settings - Binatone iDECT Freedom Twin User Manual

7.2

Alarm Settings

You can set an alarm time on this phone. When an alarm is set, the alarm
icon < > is shown on the handset display. When the alarm time is reached,
the alarm icon< > and "ALARM ON " flash on the handset display, and the
alarm tone rings for 45 seconds. You can press any key to disable the alarm.
If the snooze function is activated, the alarm will sound again at the end of the
snooze period of seven minutes. You can also press and hold <OFF>
while the alarm is sounding, to stop the alarm and turn off the snooze function.
Note:
a. A key press will still disable the alarm even if the handset keypad is locked
when the alarm rings.
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds
at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm
time is reached, the <
alarm tone will be emitted from the earpiece to alert the user the alarm time
Once the user presses any key or presses and holds.
<OFF> to disable the alarm, the display will revert to the call duration.
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no paging
or ringing, the alarm will sound again at the end of the snooze period.
7.2.1 Turn on/off the Alarm
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select ALARM.
3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.
4. Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in24 hour format.
3. Press <MENU/OK> to display "SNOOZE".
4. Press <MENU/OK> and <UP/DOWN> to select snooze ON or OFF.
5. Press <MENU/OK> to confirm.
> and "ALARM ON " will still flash. An is reached.
21