3.6
Wireless Headset LED Indicators
Purple:
Steadily on: The wireless headset is unregistered.
Flashing: The wireless headset is registered but the base is not available
(searching or out of range).
Blue:
Steadily on: When the headset is seated in the base and fully charged.
Once the headset is successfully registered,
about three seconds at a time, and emit a long beep.
Single flashing: The wireless headset is in idle mode and off the base.
Double flashing: The wireless headset is on a call, and if the
weak, double beeps will be heard.
Continuously flashing: The wireless headset is ringing. A
heard in the earpiece.
Red:
Steadily on: When the wireless headset is charging on the base.
Single flashing: Indicates that the battery is low, the unit is
the headset will emit short double beeps.
Double flashing: Indicates that the battery is low while the
and short double beeps will be emitted.
Triple flashing: Indicates powering on/off the headset and
will be emitted through the earpiece.
Red/Blue:
Toggling display: The wireless headset is in registration
headset is registered successfully, the
3.7
Menu Structure
In idle mode, press <MENU/OK> to go to CALL LIST, the first option in the
menu list.
Press <UP> or <DOWN> to go to other options in the menu list.
Press <MENU/ OK> to enter a sub-menu or function.
Press <C/MUTE> to go back to the previous level.
Refer to the following for the menu structure.
the blue light will flash on then off, for
mode. When the
headset will beep for around 3 seconds.
10
signal becomes
ringing will also be
not on the base, and
headset is in use
three short beeps