4.10 Find The Handset; Make An Internal Call(Multi-Handset Versions Only ) - Binatone iDECT Freedom Twin User Manual

4.9.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> and <UP/DOWN> to select ADD TO PB.
3. Press <MENU/OK> and then enter the name you want to use in the
phonebook.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
only be played when you receive a call if you subscribe to Caller Display
and the incoming number matches the stored number.)
7. Press <MENU/OK> to confirm, and the entry will be stored.
4.9.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm, and the entry will be deleted.
4.9.4 Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to display <CONFIRM?>.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display will
show <EMPTY>.

4.10 Find the Handset

You can locate the handset by pressing the Find button
the front of the base station. All the handsets registered to the base will
produce the paging tone and show "PAGING" on the display for 60 seconds.
You can stop the paging by pressing <TALK>/ <OFF> /<C> on any
handset or <FIND> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
4.11 Make an Internal Call (Multi - handset versions only)
This feature is only applicable when there are at least two registered handsets
or at least one handset and a headset.
It allows you to make internal calls, transfer external calls from one handset to
another handset / headset and make conference calls. If the called handset /
headset is not answered within 60 seconds, the called handset / headset will
stop ringing and the calling handset will return to standby mode.
Note: If only one handset is registered to the base station, when <C/MUTE>
is pressed, it will display "NOT POSSIBLE".
14
in the middle of