Base Two Digit-Led Display Information; Overview Of The Wireless Headset - Binatone iDECT Freedom Twin User Manual

3.4

Base Two Digit-LED Display Information

Steadily ON: Answering machine is OFF.
--
Steadily ON: There are no voice messages in the answering machine.
00
Flash in idle mode: Indicates the number of new answering machine
09
messages. (e.g. there are 9
a capacity for 59.
Flashing during message playing: The selected
machine message is being played.
Steadily ON: All the new messages have been read and there are 9
answering machine messages in total.
Flashing: TAM memory is
FF
Flashing: Time is not set and only old messages remain.
--
An/09 Flashing: Indicates an incoming call / recording of an incoming call.
The number (e.g. 09) indicates the total number of new messages.
r A
Flashing: Indicates the line remote access is in progress.
Steadily ON: Indicates the base speaker volume level is 3. Nine volume
L3
levels from L0 to L8 are provided (L0 means ringer off). L3 disappears
after 3 seconds.
3.5

Overview of the Wireless Headset

1 POWER/TALK ON/OFF
a) In idle mode: Press and
wireless headset on or off.
b) During ringing: Press to answer the call.
c) During a call: Press to end the call.
d) During registration: Press to exit the registration mode.
2
VOLUME UP/FLASH (
a) During a call: Press to increase the earpiece volume.
b) During ringing: Press to increase the ringer volume.
3
VOLUME DOWN (
a) During a call: Press to decrease the earpiece volume.
b) During ringing: Press to decrease the ringer volume.
NOTE: If the wireless headset is not registered, press and hold VOLUME UP/
FLASH together with VOLUME DOWN to initiate the registration mode.
answering machine messages in total, with
full.
hold to power the
)
)
9
new answering