Do you have a question about the SPIRIT 221 and is the answer not in the manual?
Questions and answers
SCM
February 26, 2025
Purchased new piece ,but while incoming & outgoing voice is not coming
1 comments:
Mr. Anderson
February 26, 2025
The Binatone SPIRIT 221 may have no incoming or outgoing voice due to several possible reasons:
1. Volume Settings – The ringer or handset volume may be set too low. Adjust the ringer volume using the Hi/Low settings. 2. Connection Issues – Ensure the phone is properly connected to the telephone line and that the line itself is functional. 3. Mute Function – Check if the mute function is activated, preventing audio transmission. 4. Handset or Cord Issues – Inspect the handset and cord for any damage or loose connections. 5. Tone/Pulse Setting – Ensure the phone is set to the correct dialing mode (Tone or Pulse) as per the service provider's requirements. 6. Defective Unit – If all settings and connections are correct, the phone may be faulty and require repair or replacement.
Try troubleshooting these issues to restore voice communication.
Page 1
Model No: SPIRIT 221 USER’S MANUAL Thank you for choosing BINATONE products. This product has been especially designed for easy operation. It has been manufactured with perfect workmanship using suitable material for long-lasting performance...
Page 2
FEATURES FSK/DTMF dual system 16 outgoing call memories 50 incoming call memories 24 styles of various ringtones Programmable Tone/ Pulse Calculator Functions Ringer volume Hi/Low Adjustable Redial Function Flash Function 4 Step Ringer Volume ...
Page 3
INSTALLATION OPERATION 1. Function setting: On-hook mode, Press and hold SET key to enter menu setting, the phone LCD will display SET 1 DATE, press UP or DOWN key to select different options. Press SET key again to confirm. Use UP or DOWN key to select the mode you need.
Page 4
2.2 Incoming Call Check and Call Back In any mode, press UP or DOWN key to check all the incoming numbers, and LCD displays incoming number, date and time. To call back the number displayed, press REDIAL key, or pick up the handset. Press REDIAL key twice, the number will be call back adding “0”...
Page 5
WARNING The main causes of interference on telephone line and power supply mains (that may result in malfunctioning or damages to the product) are: Accidental contacts with lines with higher voltage (short circuit). Electromagnetic association with other conductors located nearby. ...
Page 6
Always look for information on the catalogue with your product for end-of-life equipment handling. Ensure that only Authorized Recyclers repair and handle your electronic products. Always call our E-waste Authorized Collection Centres/points to dispose products that have reached end-of life. Always drop your used electronic products, batteries or any accessories when they reach the end of their life at your nearest Authorized E-Waste Collection Centres/Points.
Need help?
Do you have a question about the SPIRIT 221 and is the answer not in the manual?
Questions and answers
Purchased new piece ,but while incoming & outgoing voice is not coming
The Binatone SPIRIT 221 may have no incoming or outgoing voice due to several possible reasons:
1. Volume Settings – The ringer or handset volume may be set too low. Adjust the ringer volume using the Hi/Low settings.
2. Connection Issues – Ensure the phone is properly connected to the telephone line and that the line itself is functional.
3. Mute Function – Check if the mute function is activated, preventing audio transmission.
4. Handset or Cord Issues – Inspect the handset and cord for any damage or loose connections.
5. Tone/Pulse Setting – Ensure the phone is set to the correct dialing mode (Tone or Pulse) as per the service provider's requirements.
6. Defective Unit – If all settings and connections are correct, the phone may be faulty and require repair or replacement.
Try troubleshooting these issues to restore voice communication.
This answer is automatically generated