Binatone iDECT Freedom Twin User Manual page 17

4.11.1 Intercom Another Handset or Headset
1. In idle mode, press <C/MUTE> and all the other registered handset /
headset numbers will display, along with a "9".
2. Enter the number of the handset / headset that you want to call, or enter
"9" to call all handsets and headsets.
3. The called handset / headset rings and <TALK> must be pressed on that
handset / headset to establish the intercom call.
Note: If only one other handset / headset is registered to the base station,
pressing <C/MUTE> will call the other handset / headset immediately.
Note: If there is an external call while you are on an intercom call, you'll
hear warning beeps, and you have to end the intercom call, before you
can answer the external call.
4.11.2 Call All Handsets and Headsets
1. In idle mode, press <C/MUTE> and the registered handset / headset
numbers will display.
2. Press the < 9 > key to ring to all registered handsets / headsets.
4.11.3 Transfer an External Call to another handset / headset
During an external call:
1. Press <MENU/OK> and <UP/DOWN> to select INTERCOM.
2. Press <MENU/OK> to show all the other registered handset / headset
numbers, plus "9". Enter the number for the handset / headset you want
to transfer the call to.
3. The external call is put on hold automatically and the called handset /
headset rings.
4. Press <TALK> on the called handset / headset to establish an internal call.
5. Press <OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset / headset.
Note: If the other handset / headset has not answered the intercom call,
you can stop the intercom and return to the external call by pressing
<OFF>.
4.11.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets or one handset and a headset (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.11.3.
2. Press and hold the star key <*> on the calling handset to establish the
conference call.
Either handset / headset can exit the conference by pressing <OFF>,
leaving the other handset / headset still connected to the external call.
15