Using Your Phone; Make A Call; Answer A Call; End A Call - Binatone iDECT Freedom Twin User Manual

4

USING YOUR PHONE

4.1

Make a Call

4.1.1 Preparatory Dialling
Enter the phone number and press <TALK> to connect to the line and
dial the number. When entering the number, if you make a mistake,
press <C/MUTE> to delete digits.
4.1.2 Direct Dialling
Press <TALK> to connect to the line and then enter the phone number.
(Note: if you enter a wrong digit you cannot correct it with the <C/MUTE> key.)
4.1.3 Call from the phonebook
Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook and
press <UP/DOWN> to select the desired phonebook entry.
Press <TALK> to dial out the selected phonebook entry.
Note: The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP/CALLS> to access the Call List and press <UP/DOWN> to select the
desired Call List entry.
Press <TALK> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <DOWN/REDIAL> to access the redial list and press <UP/DOWN> to
select the desired redial number.
Press <TALK> to dial out the selected redial number.
4.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after
dialling and remains on the screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
4.2

Answer a Call

If the handset is not on the charging cradle:
When the phone rings, press <TALK> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
pressed.
4.3

End a Call

During a call press <OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
12