Base Station With Telephone Answering Machine(Tam)Control; 3.4 Base Two Digit-Led Display Information - Binatone iDECT M3i User Manual

3.3 Base Station with Telephone Answering Machine (TAM) Control
CHARGING LED
On: when the handset is put into
base cradle for charging.
PAGE
Press to page all registered
handsets.
CHARGING CRADLE
DELETE
During message playback: press to delete
the current message.
In idle: press twice to delete all previously
reviewed messages.
STOP
Press to stop playing messages.
SKIP BACKWARD
Press to repeat playing the current message.
Press twice to skip back to the previous message.

3.4 Base Two Digit-LED Display Information

-- Displayed when the answering machine is turned OFF
Displayed when the answering machine is turned ON where
XX
XX is number of messages in TAM memory.
00 Steady ON: No voice messages in the TAM.
Flashing: There are XX new messages recorded where XX is
XX
from 01 to 59.
ZZ Steady ON: There are ZZ old messages in the TAM memory
and no new messages.
Flashing XX alternately with FF: There are XX new voice
XX/FF
messages recorded and the TAM memory is full.
IN USE LED
when there is an incoming call, or the
Flashes
answering mechine is on line or has a new message.
Steady on when a cordless handset is
VOLUME +
During message playback: press
to increase the speaker volume.
In idle: press to increase the
base ringer volume.
Press to switch the answering
machine on/off.
SKIP FORWARD
During message playback: press
to skip to the next message.
PLAY
Press
VOLUME –
During message playback: press to
decrease the speaker volume.
In idle: press to decrease the base
ringer volume
8
on line
ANSWER ON/OFF
to play
messages.
.