Basic Functionality; Router Won't Turn On; Leds Never Turn Off; Lan Or Internet Port Not On - Billion BiGuard 2 User Manual

Chapter 5: Troubleshooting

5.1 Basic Functionality

This section deals with issues regarding your BiGuard 2/10's basic functions.

5.1.1 Router Won't Turn On

If the Power and other LEDs fail to light when your BiGuard 2/10 is turned on:
- Make sure that the power cord is properly connected to your firewall and that the
power supply adapter is properly connected to a functioning power outlet.
- Check that you are using the 12VDC power adapter supplied by Billion for this
product.
If the error persists, you may have a hardware problem, and should contact
technical support.

5.1.2 LEDs Never Turn Off

When your BiGuard 2/10 is turned on, the LEDs turn on for about 10 seconds and
then turn off. If all the LEDs stay on, there may be a hardware problem.
If all LEDs are still on one minute after powering up:
- Cycle the power to see if the router recovers.
- Clear the configuration to factory defaults.
If the error persists, you may have a hardware problem, and should contact
technical support.

5.1.3 LAN or Internet Port Not On

If either the LAN LEDs or Internet LED does not light when the Ethernet connection
is made, check the following:
118