Static Ip - Billion BiGuard 2 User Manual
Ibusiness security gateway small-office; ibusiness security gateway home-office
Hide thumbs
Also See for BiGuard 2:
- Quick start manual (14 pages) ,
- Specifications (2 pages) ,
- User manual (170 pages)
Table of Contents
Advertisement
4.4.2.2 Static IP
IP assigned by your ISP: Enter the static IP assigned by your ISP.
IP Subnet Mask: Enter the IP subnet mask provided by your ISP.
ISP Gateway Address: Enter the ISP gateway address provided by your ISP.
MAC Address: If your ISP requires you to input a WAN Ethernet MAC, check the
checkbox and enter your MAC address in the blanks below.
Primary DNS: Enter the primary DNS provided by your ISP.
Secondary DNS: Enter the secondary DNS provided by your ISP.
RIP: To activate RIP, select Send, Receive, or Both from the drop down menu. To
disable RIP, select Disable from the drop down menu.
MTU: Enter the Maximum Transmission Unit (MTU) for your network.
Click Apply to save your changes. To reset to defaults, click Reset.
74
Advertisement
Table of Contents
