Billion BiPAC 7404V(G)OX/V(G)PX User Manual page 184

LAN.
Management IP Address: You may specify an IP address allowed to logon and access
the router's web server. Setting the IP address to 0.0.0.0 will disable IP address
restrictions, allowing users to login from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user's
configuration
session.
For Example: User A changes HTTP port number to 100, specifies their own IP address of
192.168.1.55, and sets the logout time to be 100 seconds. The router will only allow User A
access from the IP address 192.168.1.55 to logon to the Web GUI by typing:
http://192.168.1.254:100
automatically logout User A.
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with
control and data transfer between devices. UPnP offers many advantages for users
runningNAT routers through UPnP NAT Traversal, and on supported systems makes tasks
such as port forwarding much easier by letting the application control the required settings,
removing the need for the user to control advanced configuration of their device.
Both the user's Operating System and the relevant application must support UPnP in addition
to the router. Windows XP and Windows Me natively support UPnP (when the component is
installed), and Windows 98 users may install the Internet Connection Sharing client from
Windows XP in order to support UPnP. Windows 2000 does not support UPnP.
Disable: Check to disable the router's UPnP functionality.
Enable: Check to enable the router's UPnP functionality.
UPnP Port: Its default setting is 2800. It is highly recommended for users to use this port
value. If
this value conflicts with other ports already being used you may wish to change the port.
SNMP Access Control (Software on a PC within the LAN is required in order to
utilize this function) – Simple Network Management Protocol.
Disable: Check to disable the router's SNMP functionality.
Enable: Check to enable the router's SNMP functionality.
SNMP V1 and V2:
Read Community: Specify a name to be identified as the Read Community, and an IP
address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, user obtains this IP address will be able
to view the data.
Write Community: Specify a name to be identified as the Write Community, and an IP
address. This community string will be checked against the string entered in the
configuration file. Once the string name is matched, users from this IP address will be able
to view and modify the data.
in their web browser. After 100 seconds, the device will
180