Billion BiPAC 7404V(G)OX/V(G)PX User Manual page 84

Gateway: Type the gateway to which the WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the
concrete ones in the Primary and secondary fields.
PPPoE
PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up
services using PPP.
Profile Port: Select EWAN as the profile port.
WAN Port: the router offers its Ethernet port 1 as a WAN port to be used to connect to Cable
Modems and fiber optic lines.
Protocol: Select PPPoE.
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive). This is in the format of "username@ispname" instead of simply
"username".
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric
characters (case sensitive).
Service Name: Enter a name for this connection.
IP: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from
your ISP.
Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
Connection:
Always on: If you want the router to establish a PPPoE session when starting up and to
automatically re-establish the PPPoE session when disconnected by the ISP.
Connect on Demand: If you want to establish a PPPoE session only when there is a
82