Power Supply; Unit Holder - Becker MAP PILOT Operating Manual

>>> GENERAL OPERATION

Power supply

> D
Your Becker® MAP PILOT has an inte-
grated rechargeable battery. The battery is
> GB
charged as soon as the Becker® MAP
> F
PILOT is placed in the holder and the ve-
hicle ignition is switched on.
> I
Note:
> E
Note that if the battery is completely dis-
charged, it may take up to a minute be-
> P
fore the Becker® MAP PILOT can be
> NL
activated again.
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
10

Unit holder

The Becker® MAP PILOT is inserted in
the holder in the vehicle's glove compart-
ment.
When inserting the Becker® MAP
PILOT make sure that it is pushed in un-
til it stops.
To remove the Becker® MAP PILOT
from the holder, push the slide at the front
of the holder.
Note:
The slide can be pulled out. When the
slide is pulled out, the Becker® MAP
PILOT cannot be unlocked. This can
serve as an additional protection against
theft.
To unlock the Becker® MAP PILOT the
slide can only be inserted one way.
The Becker® MAP PILOT is released
and ejected a little way. You can now re-
move the Becker® MAP PILOT from the
holder.