Route planning
The route planning menu allows you to
create and select individual routes. To do
this, enter the individual destination
points for the desired route. It is then pos-
sible to travel to these points consecutively
without having to enter any further infor-
mation. You can also optimise the desti-
nation points entered and in so doing
change their order.
> Select
from the desti-
Route planning
nation input menu.
The route menu is displayed.
In the route menu, you can create a new
route by selecting
Create new route
the list displayed below, the stored previ-
ous routes are displayed in alphabetical or-
der.
Note:
If no routes have yet been stored, the
route menu is empty.
Editing stored routes
You can change the name of a stored route
or delete it.
> Highlight the route you wish to edit.
> Push the rotary control/push button to
the right.
By selecting
Rename route
the route a new name.
By selecting
Delete route
the route from the stored routes.
Selecting and starting a route
> Select the required route from the route
menu.
The route is loaded and displayed in the
stage menu.
. In
> Select
.
Calculate
Note:
You can also select a stage in the route
here. The route is then started from this
stage.
> Select the start point or your current
position as the start point for route
guidance.
Note:
When a start point is selected, this is only
you can give
used for the purposes of displaying a
route.
you can delete
The individual stages are calculated.
A map of the stages will then be displayed.
The total distance and estimated total
journey time are displayed on the left-
hand side.
> Select
Start
select one of the functions described be-
low.
NAVIGATION MODE
to start route guidance or
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
29