Displaying Tmc Messages On The Map; Using Tmc - Becker Traffic Assist Z 201 Operating Instructions Manual

Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.
Austria: The location and event code was
made available by ASFINAG and BM-
VIT.
The Traffic Assist constantly checks
whether there are any relevant announce-
ments for the route that has been set. All
traffic problems that have been received
are shown on the map.
If the continuous checks determine that a
traffic announcement is relevant to route
guidance, the unit can automatically re-
calculate a new route to the destination
(See "The TMC button" on page 49.)
Displaying TMC messages on the
map
Current TMC messages are displayed on
the map graphically. Sections of the route
where there are traffic problems are high-
lighted blue. Arrows indicating the traffic
direction which is affected by the traffic
problem continue to be displayed.
In addition to the coloured mark, a warn-
ing sign is displayed on the stretch of road
affected.
NAVIGATION MODE

Using TMC

Once you have connected the TMC an-
tenna, your Traffic Assist will receive cur-
rent traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
Settings for TMC can be made as de-
scribed under "The TMC button" on
page 49.
> In the main menu, press
TMC
The message list appears.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
.
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
55