Points Of Interest - Becker Traffic Assist Z 107 Operating Instructions Manual

>>> NAVIGATION MODE
If the route guidance is already running
you will be asked whether the new desti-
> D
nation should replace the old destination
> GB
or if the new destination should be regard-
ed as a waypoint.
> F
> I
> E
> P
> NL
> Select
Add as stopover
.
> DK destination
If the route guidance is already running
> S
and a waypoint has already been entered
you will be asked whether the new desti-
> N
nation should replace the old destination
> FIN
or the waypoint.
> TR
> GR
> PL
> CZ
> Select
Replace stopover
> H
old destination
> SK
40
Note:
If there is no GPS signal when the route
is calculated, the following will be dis-
played:
When a GPS signal is available, the route
or
Replace old
calculation will start automatically.
When the
pressed, the last known position is used
and the route calculated from this posi-
tion.
or
Replace
.
button is
Last position

Points of interest

Points of interest (POI) are included in
the map and can be displayed there.
Points of interest include airports and fer-
ry ports, restaurants, hotels, petrol sta-
tions, public buildings. You can use points
of interests as navigation destinations.
Note:
You can only select points of interest in
the area in question if the GPS reception
is adequate for determining a position.
Otherwise, the last position stored will be
used.
> Press in the fast ac-
Enter destination
cess menu.
> Press the
Select Point of Interest
ton.
but-