Becker Traffic Assist Z 107 Operating Instructions Manual page 73

TMC on the route
You can view and edit TMC messages lo-
cated on your route.
Note:
Also displayed are the TMC messages
that have led to a change in the route.
> Open the options menu for the map
display.
> Press the button.
Route
> Press the
button.
TMC on route
The TMC messages located on your route
are displayed.
Once you have selected a message you can
decide e.g. whether or not to divert
around the hold-up. Please also refer to
the description in "Traffic announce-
ments using TMC" on page 56.
Block route
You can block a stretch of road ahead.
This determines a certain stretch of road
that should not be used. Traffic Assist
then attempts to calculate a diversion.
> Open the options menu for the map
display.
> Press the
button.
Route
> Press the
button.
Block
> Select the length of the desired block us-
ing the and buttons.
You can cancel the block by pressing the
button.
Reset
> Confirm your selection by pressing the
button.
OK
The route is recalculated.
NAVIGATION MODE
Changing route options
You can modify the route options (route
selection etc.) during route guidance.
> Open the options menu for the map
display.
> Press the
button.
Route
> Press the
button.
Options
> Set the route options as described under
"The Route options button" on
page 49.
After a change, the route is recalculated.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
73