Becker Traffic Assist Z 107 Operating Instructions Manual page 50

>>> NAVIGATION MODE
> After pressing the button next to
select one of the following options.
> D
type
Option
> GB
Optimal route
> F
> I
> E
Fast route
> P
> NL Short route
> DK
Easy route
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
50
Displaying different route types
Route
You can use the Traffic Assist to display
previously described routes.
Meaning
With this option, the op-
timum route in terms of
travel time and mileage is
calculated.
With this option, the
fastest route in terms of
> Press the
travel time is calculated.
With this option, the
After a short time, the map will appear.
shortest route in terms of
The individual routes are calculated one
mileage is calculated.
after another and marked on the map.
With this option, a route
with as few manoeuvres
as possible is calculated.
This may result in large
detours.
The area on the right-hand side shows the
colour key for the individual routes, the
mileage for each route and the estimated
driving time.
Note:
This function can only be selected if
route guidance is already active or the
route option setting was called up from a
destination input window.
Show route types on map
button.
Note:
Please note that, in many cases, the fastest
route will overlay a simple or optimum
route.
You can select the desired route by press-
ing one of the buttons.
Avoiding particular types of road
After pressing the button next to
you can exclude various types of road, e.g.
, and
motorways ferries toll roads
the route calculation.
You can set one of the following options
for each of these road types.
Avoid
, from