Becker Traffic Assist Z 107 Operating Instructions Manual page 46

>>> NAVIGATION MODE
By pressing
Add stage
stage to the route.
> D
After pressing
Rename route
> GB
the route a new name.
Pressing
Delete route
> F
lete the route from the stored routes.
> I
Selecting and starting a route
> E
> Press a route to select it.
The route is loaded and displayed in the
> P
stage menu.
> NL
> DK
> S
> N
> FIN
> Press the top button.
Note:
> TR
You can also select a leg of the route. The
> GR
route is started as of this leg.
> PL
> CZ
> H
> SK
46
you can now add a
you can give
will allow you to de-
> Select the start point or your current
position as the start point for route
guidance.
Note:
If a start point is selected, this is only used
to view a route.
The individual stages are calculated.
A map of the stages will then be displayed.
> Press the
for this route.
button to start guidance
Start
You can call up the route options using
the button.
Options
You can optimise the order of the destina-
tions to be travelled to by pressing the
Optimise button.
By pressing the or
can simulate the entire route quickly or
slowly. You can stop the simulation by
tapping the screen.
You can use the and
the bottom line to scroll through the indi-
vidual stages in the route. As you scroll,
each stage is shown.
button you
buttons in