The Tmc Button; The Map Info Button - Becker Traffic Assist Z 107 Operating Instructions Manual

>>> NAVIGATION MODE

The TMC button

You can configure settings for the recep-
> D
tion of traffic announcements in the
> GB
TMC settings window.
> Press
in the settings menu.
TMC
> F
> I
The TMC settings window appears.
> E
> P
> NL
> DK
> S
> N Setting
Auto-select
> FIN
station
> TR
> GR
> PL
> CZ
> H
> SK
52
Meaning
Choose whether to run
an automatic search for
the station with the best
reception (function
switched on ).
> Confirm your settings by pressing the
Setting Meaning
Press the arrow buttons
to activate the automatic
station search. The cur-
rently tuned TMC sta-
tion is displayed in the
adjacent field. This can
only be set if the
select station
switched off.
This button allows you
Rerouting
to choose whether the
route change should be
made ,
Never
Automatically
. (See "Taking
Manually
announcements into
consideration when cal-
culating routes" on
page 59.) The setting
is equivalent to
Never
switching off the TMC
function.
button.
OK

The Map info button

In the Map info settings window, you can
configure settings for additional informa-
tion in the map display.
> Press
Map info
Auto-
The Map info settings window appears.
function is
or
Setting
Street names
2D
Street names
3D
in the settings menu.
Meaning
When you switch this
option on, all street
names are displayed on
the map in 2D mode.
When you switch this
option on, all street
names are displayed on
the map in 3D mode.