Becker Traffic Assist Z 107 Operating Instructions Manual page 66

>>> NAVIGATION MODE
• Switch between 2D and 3D map dis-
play.
> D
• Change the zoom steps and the map an-
> GB
gle in 3D mode.
• Orientating the map and changing the
> F
zoom increments in 2D mode.
> I
• Display the current position.
> E
button:
Route
> P
> NL
> DK
> S
The following options are available:
> N
• Select a POI on the route.
• Display TMC messages located on the
> FIN
route.
> TR
• Block a route ahead.
• Change the route options.
> GR
> PL
> CZ
> H
> SK
66
Cancel route guidance
You can cancel active route guidance.
> Open the options menu for the map
display.
> Press the
button.
Guidance
> Press the
button.
Stop guidance
This cancels route guidance to all destina-
tions.
Note:
You can also cancel route guidance as de-
scribed in "The main menu" on page 23.
Enter/delete waypoint
With this function, you can enter a way-
point or delete an entered waypoint.
> Open the options menu for the map
display.
> Press the
button.
Guidance
> Press the
button.
Add stopover
You can now enter a destination as a way-
point as described under "The destination
input menu" on page 34 (
Enter address
,
Select Point of Interest Select on map
or ). You also have
Enter geo-coordinates
the option of quickly selecting a destina-
tion using the
Select
button.
destinations
Once you have entered the desired way-
point, the route is recalculated.
The entered waypoint is marked on the
map with a yellow flag.
Deleting a waypoint
> Open the options menu for the map
display.
> Press the button.
Guidance
> Press the button.
Delete stopover
,
from last