Becker Traffic Assist Z 107 Operating Instructions Manual page 68

>>> NAVIGATION MODE
Displaying the destination list
If a planned route with a number of desti-
> D
nations is active, you can display the entire
> GB
route with all the destinations on the map
or in a list.
> F
> Open the options menu for the map
display.
> I
> Press the
Guidance
> E
> Press the
> P
> NL
> DK
> S
The planned route is displayed on the
> N
map.
> FIN
By pressing the
can simulate the entire route quickly or
> TR
slowly. You can stop the simulation by
tapping the screen.
> GR
> PL
> CZ
> H
> SK
68
You can use the
the bottom line to scroll through the indi-
vidual stages in the route. As you scroll,
each stage is shown.
You can block the displayed stage by se-
lecting
button. Press
button. route as a list.
The individual stages in the route are dis-
played as a list. To return to the route
or button you guidance, press the top button.
To edit one of the stages, press the
button next to the stage.
and buttons in
.
Clear form
to display the stages in the
List view
The following options are then available:
• Use to display informa-
Show details
tion regarding the selected stage.
• Use and
Move up Move down
change the order of the stages.
• Use to delete the selected
Delete stage
stage.
• Use to start guidance
Start guidance
for the selected stage.
Skipping destination
If a planned route with several destina-
tions is active, you may delete the current
destination of the route. Route guidance
to the next destination is then started.
This may be necessary if a destination was
not driven to directly. The Traffic Assist
otherwise tries to guide you to the current
destination.
> Call up the options menu for the map
display.
> Press the
button.
Guidance
> Press the
button.
Route guidance to the next destination is
started.
to