Table of Contents
Advertisement
o The body near the nozzle should always be clean. Dirt
accumulating around the nozzle may clog it, as a result of whic
the burner will not light or
clean the nozzle use a brush soaked in solvent.
o Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dr
out the disassembly steps in reverse order.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you
r
emove or replace the oven bulb.
Replace the bulb with a 15 W/300°C, screw type pygmy.
o
Do not use any other type of bulb.
o
o Screw the lamp cover back into its original position.
will light only with a small flame. To
o Remove all oven
and the drip tray.
Unscrew the lamp cover.
o
o Unscrew
remove it from its holder.
22
y burners carrying
attempt to either
shelves
the
bulb
and
h
Advertisement
Table of Contents
