Table of Contents
Advertisement
Power Saving
Touch panel
1.2 Package contents
The monitor comes with a power saving feature;
therefore, you may put the monitor into a power
saving state when it is not in use. This feature
complies with both EPA's Energy Star
requirements and European NUTEK/TCO's
power management guidelines. It conforms to
Video Electronics Standard Association (VESA)
approved DPMS power-down signaling method.
This monitor automatically cuts down power
consumption of monitor set when not detecting
Hsync or Vsync signals. This feature is compliant
with VESA DPMS.
The MFCD 1219 TS is equipped with a touch
panel. Instructions on how to install and use the
touch panel driver and controls can be found in
the "TouchKit, Barco TouchScreen controller
installation and user manual" on the supplied
CD-ROM.
The package should include the following items,
please check. If some of the items are missing,
please contact the reseller you have purchased
the unit from.
-
The display with foot
-
12V DC adapter
-
European power cord
-
American power cord
-
UK power cord
-
Video cables: VGA cable and DVI-D cable
-
Mounting plate with 4 screws
-
This user manual
-
Calibration software CD-ROM
-
USB cable for touch panel
MFCD 1219 (TS) User's Guide
6
Advertisement
Table of Contents
