Figure 3.6: Oscar Interface Device Modify Dialog Box; Changing The Display Behavior; To Assign A Device Type - Avocent DSR Installer/User Manual

To assign a device type:

1. In the Devices dialog box, select the desired port number.
2. Click Modify to open the Device Modify dialog box.

Figure 3.6: OSCAR Interface Device Modify Dialog Box

3. Choose the number of ports supported by your switch and click OK.
4. Repeat steps 1-3 for each port requiring a device type to be assigned.
5. Click OK in the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the Devices
dialog box.

Changing the display behavior

Use the Menu dialog box, shown in Figure 3.7 on page 32, to change the display order of target
devices and set a Screen Delay Time for the OSCAR interface. The display order setting alters how
target devices will display in several dialog boxes, including Main, Devices and Broadcast.
To access the OSCAR interface Menu dialog box:
1. Press
Print Screen
2. Click Setup - Menu in the Main dialog box to open the Menu dialog box appears.
to launch the OSCAR interface and to open the Main dialog box.
Chapter 3: Local Port Operation 31