Unix - Avocent DSR Installer/User Manual

UNIX

To adjust the mouse speed and pointer settings for Sun Solaris v9 drivers:
NOTE: To use a Sun Solaris driver with the DSView software and DSR switch, you must have the following
versions of DSView software on your host system and DSR switch firmware:
• DSView software version 2.x and earlier - DS Management Software suite version 1.0.9.202 or later
• DSR switch with DSView software version 2.x and earlier - Firmware version 1.0.0.106 to 2.x
• DSR switch with DSView software 3.0 and later - Firmware version 3.0 or later
1. From the Workspace Menu, select Desktop Manager and go to 3.
- or -
Click on the tab above the Text Note control and select Applications to open the Application
Manager window.
2. Click the Desktop_Controls icon to open the Application Manager -
Desktop_Controls window.
3. Double-click the Mouse Style Manager icon to open the Style Manager toolbar and Style
Manager - Mouse dialog box.
4. In the Style Manager - Mouse dialog box, set the Acceleration slider to 1.0.
5. (Optional) Select the desired Handedness and Button 2 options and set the Double-Click and
the Threshold sliders to the desired positions. Test the double-click speed by double-clicking
on the mouse icon.
6. Click OK to to save your settings and to close the dialog box.
7. If you are using DSView or AVWorks software, select Video - Scaling - Auto Scale in any
active remote session window.
8. Set the mouse scaling to normal by performing the following actions:
a. From the Video Viewer menu, select Tools - Session Options to open the Session Options
dialog box.
b. Click the Mouse tab.
c. In the Mouse Scaling area, select the Default radio button.
d. Click OK to save your settings and to close the Session Options dialog box.
9. Resynchronize the mouse in the software remote session window for the Avocent management
software you are using:
• If you are using DSView software version 2.x or earlier, click Mouse Align.
• If you are using DSView software version 3.0 or later, click Align Local Cursor.
• If you are using the AVWorks software, click Screen Refresh.
The mouse resynchronizes and should work properly.
Chapter 2: Installation 17