Summary of Contents for Avocent DSR Series DSR1020
Page 1
Version 3.6.0.14 or 3.6.6.14 (depending on product) This document outlines: 1. Update Instructions 2. Firmware Version and Language Support Information 3. Enhancements 4. Fixes 5. Known Issues 6. Flash Update Failure Recovery ============================================================================= ============================================================================= Please refer to your user manual for detailed instructions to update the switch. Important Note: If the DSR switch currently has a firmware version earlier than 3.2.0.17 (or 3.6.2.17 for DSR1020, DSR2020, or DSR4020 switches) then the switch must first be upgraded to 3.2.0.17 (or 3.6.2.17 for...
Page 2
Note: This feature requires DSView 3 software version 3.6 or later. 5. Added support for the Avocent iKVM switch integrated into the Dell® PowerEdge® M1000e Modular Blade Enclosure to provide seamless access to each of 16 server blades and the Dell Chassis Management Controller (CMC).
Page 3
1800 characters per minute. 7. Resolved issue where portions of the DSR switch’s Avocent-proprietary SNMP MIB were readable via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3 software.
Need help?
Do you have a question about the DSR Series DSR1020 and is the answer not in the manual?
Questions and answers