Summary of Contents for Avocent DSR Series DSR1020
Page 1
Version 3.5.1.16 or 3.6.5.16 (depending on product) This document outlines: 1. Update Instructions 2. Appliance Firmware Version and Language Support Information 3. Enhancements 4. Fixes 5. Known Issues 6. Flash Update Failure Recovery ============================================================================= ============================================================================= Please refer to your user manual for detailed instructions to update the appliance. Important Note: If the appliance currently has a firmware version earlier than 3.2.0.17 (or 3.6.2.17 for DSR1020, DSR2020, or DSR4020 switches) then the appliance must first be upgraded to 3.2.0.17...
Page 2
3.5.1.88 or higher. Note: ICMP ping response cannot be disabled while in IPv6 mode. 3. Added support for Avocent Mouse Synchronization, which eliminates the need to disable mouse acceleration on Windows® and Macintosh® target devices connected via a DSAVIQ-USB2 module.
Page 3
============================================================================= ============================================================================= This release contains no known issues. ============================================================================= ============================================================================= If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch is in recovery mode. Use the following steps to recover from a failed FLASH upgrade: 1.
Need help?
Do you have a question about the DSR Series DSR1020 and is the answer not in the manual?
Questions and answers