Avaya 4600 Series Installation Manual page 17

Figure 2-1. Connection Jacks on a 4602/4606/4612/4624 IP Telephone
1. Plug one end of the H4DU 4-conductor coiled handset cord into the telephone and the other
end into the handset.
2. Plug one end of the first Category 5 modular line cord into the Ethernet jack of the PC and the
other end into the secondary Ethernet jack on the 4600 Series IP Telephone.
3. Plug one end of the second Category 5 modular line cord into the Ethernet jack on the 4600
Series IP Telephone and the other end into the Ethernet wall jack. If the telephone is to be
IEEE-powered, you are finished. Do not proceed to Step 4.
4. If the telephone is to be powered locally in the United States and Canada, plug the barrel
connector on the power cord into the 4600 Series IP Telephone and the plug on the power
cord into the wall socket.
If the telephone is to be powered locally outside of the United States and Canada,
connect the 1151 power brick to the power cable, plug the barrel connector to the 4600 Series
IP Telephone and the plug into the wall socket.
DC
= optional
(DSS 4624)
facultatif
optionale
opcional
Chapter 2: 4600 Series IP Telephone Installation
Assembling the 4600 Series IP Telephone
2-5