Ethernet Connections (Aew-R5200 Only); Receiver Controls And Functions; Aew-R5200 Front Panel Controls And Functions; Aew-R5200 Front Panel Controls And Functions (Figure C) - Audio Technica ARTIST ELITE 4000 Series Installation And Operation Manual

Ethernet connections (AEW-R5200): An RJ-45 jack on the rear
panel of each AEW-R5200 provides an Ethernet 10BaseT
data/control connection from both of its channels to an external
computer system. Data monitored includes actual, real-time " RF "
and " AF " levels for receiver channels with direct Ethernet
connections to the associated computer. All other linked receivers
in a system supply control-function access and all their data –
except for " RF " and " AF " levels – to the
computer connected to the Master receiver.
Multiple AEW-R5200 receivers in a system can each provide real-
time " RF " and " AF " levels to the associated computer if each
AEW-R5200 has its own Ethernet connection, through an
Ethernet hub, to the computer.
Figure C AEW-R5200 Receiver Front Panel
UHF SYNTHESIZED DIVERSITY RECEIVER AEW-R5200
ON
POWER
OFF
13 1
Front Panel Controls and Functions (Fig. C)
1 POWER SWITCH: Press Power switch in and the receiver
readouts will light.
2 HEADPHONE OUTPUT:
jack. Plug in either a mono or "stereo" headphone to monitor
receiver signal.
3 HEADPHONE LEVEL CONTROL / CHANNEL SWITCH:
Adjusts the level of the headphone jack only; it does not
affect receiver audio output. Press-and-release the knob to
switch between Channel 1 and Channel 2.
4 HEADPHONE CHANNEL INDICATOR: Shows which receiver
channel is feeding the monitor headphones.
Channel 1 / Channel 2
5 / 9 ALERT INDICATOR: The Alert Indicator lights:
(a) When the receiver is in the Mute mode,
(b) When no RF signal is received from the transmitter,
(c) When only one or two RF signal-strength bars are on,
(d) When the transmitter is in the Mute mode,
(e) When audio modulation level from the transmitter is
close to the clipping point (AF +6 bar), or
(f) When the "LOW BAT" warning appears in the LCD
(transmitter battery is weak).
10
Receiver Installation

Receiver Controls and Functions

PUSH SEL
OUTPUT LEVEL
PHONES MIN MAX
2
3 4 5
6
1 / " (6.3 mm) TRS ("stereo") phone
4
(Continued)
Other than being able to "see" the " RF " and " AF " levels, all
functions of all receivers in a linked system can be
monitored and controlled from the computer connected to the
Master receiver.
Details of the computer setup and operation will be found in
a separate AEW Control Interface manual provided with
AEW-R5200 receivers and 5000 Series systems.
MODE/SET
RX NAME
7 8 9
6 / 10 LCD WINDOW: Liquid Crystal Display indicates control
settings and operational readings. See Figure G on page 13
for details.
7 / 11 UP/DOWN BUTTONS: Press Up or Down arrow
button, in conjunction with the Mode/Set button, to step
through menus, select operating frequency and edit receiver
function choices.
8 / 12 MODE/SET BUTTON: Use in conjunction with the
Up/Down arrow buttons to step through menus, choose
operating frequency and select receiver function options.
13 FRONT-MOUNT ANTENNAS: Cables and panel connectors
are included with the AEW-R5200 to permit attaching
antennas at the front panel.
MODE/SET
RX NAME
10 11 12 13