Operating Frequencies; Receivers - Audio Technica ARTIST ELITE 4000 Series Installation And Operation Manual

Operating Frequencies

4000/5000 Series systems and components operate on
approximately 200 frequencies for each 25MHz-wide UHF
frequency band. See frequency listing on page 3:
For simplicity, model numbers used throughout this manual will
reference only the basic model number.
Artist Elite Series components feature an advanced digital Tone
Lock ™ squelch system and unique Dual Compander design
(patents pending). As a result, Artist Elite Series transmitters and
receivers must be used together in Tx-Rx pairs and should not be
mixed with components from other Audio-Technica
wireless systems, or with those of other manufacturers.
All Artist Elite Series components feature soft-touch controls
for quick, easy access to a formidable range of functions; an LCD
information display in each unit provides convenient visual
indication of unit settings and operation. Digital data send by the
transmitters is available for display on the receivers.

Receivers

Both Artist Elite receiver models feature True Diversity
reception. Two antennas feed two completely independent
RF sections on the same frequency; automatic logic circuitry
continuously compares and selects the superior received signal,
providing better sound quality and reducing the possibility of
interference and dropouts.
Both receivers offer a choice of approximately 200 operating
frequencies in a 25 MHz-wide UHF frequency range. AEW
wireless are designed with a channel spacing that exceeds the
transmitters' maximum modulation deviation, so even adjacent
channels are actually usable, unlike some other wireless
systems on the market. (For operation of two or more systems at
the same time, please consult the multi-channel plan on page 30,
or use the IntelliScan function for frequency selection.)
AEW-R4100: A single synthesized UHF receiver in a half-rack 1U
case. Its power supply operates on 100–240V 50/60 Hz AC power
worldwide with the appropriate IEC-type power input cordset.
AEW-R5200: Two independent synthesized UHF receiver
channels in a full-rack 1U case. Its common power supply
operates on 100–240V 50/60 Hz AC power worldwide with
the appropriate IEC-type power input cordset. In addition, a "pass-
through" AC outlet on each receiver with included AC jumper
cable permits daisy-chaining of an entire AEW-R5200 receiver
stack, freeing AC outlets for other equipment.
7