Contents Introduction ....................................3 Our assumptions about you ..............................3 Notice to novice users ..............................3 What this manual covers ..............................3 How this manual is organized..............................3 Where to go for further assistance............................3 Minimum Requirements ................................4 Tasks the Software Performs ..............................4 System features the software monitors and controls ......................4 System features the software monitors (but does not control) ....................4 Software tools..................................4 Installing the Hardware................................5...
Introduction Thank you for choosing an Audio-Technica professional How this manual is organized wireless system. You have joined thousands of other satisfied The manual starts with a description of the minimum customers who have chosen our products because of their requirements for running the software and guides you through quality, performance, and reliability.
Minimum Requirements Macintosh Windows • Apple Macintosh computer capable of running OS X ® ® Microsoft ® Windows ® 98 or later, including the following version 10.2.6 or later versions: • Apple ® Macintosh ® OS X v. 10.2.6 or later •...
Installing the Hardware Depending on how the AEW-R5200 receiver will be used, the General instructions for hardware installation installation and hookup process differs. For most applications, Following are instructions for connecting receivers to an however, setting up the AEW-R5200 is a simple process. existing network and for connecting receivers to a computer without a network.
Installing the Hardware (Continued) To connect one or more AEW-R5200 receivers using DHCP- To connect one or more AEW-R5200 receivers to an existing supporting router (stand-alone network): (Figure C) network to which your computer is also connected: You will need an Ethernet router that is configurable as a DHCP (Figure B) Server, along with sufficient RJ45-terminated Ethernet cables to You will need an Ethernet hub and sufficient Ethernet cables to...
Installing the Hardware (Continued) To connect a single AEW-R5200 directly to a computer's For Macintosh ® Ethernet card: 1. Open System Preferences and click on Network For Windows ® 2. In TCP/IP Tab do the following: 1. In Windows, open the Network and Dial-up Connections •...
Installing the Hardware (Continued) To connect multiple receivers via link cables (for systems Note 1: Occasions may arise for which you wish to set up a that include AEW-R4100 receivers, or for systems without system comprising one master AEW-R5200 and multiple access to multiple Ethernet connections): slave AEW-R5200 units.
Installing the Hardware (Continued) To set up remote access to the AEW-R5200 via the Internet: Here are some general guidelines for accessing a system via the Internet: It is possible to configure your LAN or Internet connection to access the receivers from a remote location using a 1.
Installing and Using the Software (Continued) Navigating the Software Main System window The Main System window shows all of the active (enabled) receiver channels on the network. A vertical channel “strip” represents each channel. The window can be resized to view more channel strips.
Installing and Using the Software (Continued) Changing Lock Setting Navigating the Software (continued) Click on the dropdown menu to select one of the following Channel Detail Window - Control Function Settings receiver lock options: No Lock, Rx Lock, PC Lock, or All Lock. Refer to Figure G (Page 10) for Control Function locations.
Installing and Using the Software (Continued) To change the order of display of a receiver: Navigating the File Menu 1. Click on File > Receiver Configuration. Open Environment 2. In the Receiver Configuration window, click on the receiver Use the Open Environment command to open a previously to select it.
Installing and Using the Software (Continued) Navigating the Tools Menu 7. Click Start to begin the process (or Cancel to disregard changes and return to the Main System window). IntelliScan ™ 8. A box pops up with a warning “This is about to rechannelize The IntelliScan command starts the automatic channel your system.
Installing and Using the Software (Continued) Coverage Test Navigating the Tools Menu (continued) The Coverage Test helps you determine where in the Spectrum Analyzer performance area your transmitters are strongest and where Use the Spectrum Analyzer to discover which frequencies they are weakest by providing a graph of RF power vs.
Installing and Using the Software (Continued) Installing and Using the AE Reflector Service Navigating the View Menu General: The View menu gives you: The AE Reflector service is a Windows software application • the opportunity to choose either large-, medium-, or small- that allows multiple computer users on the network to view, sized receiver channel displays in the Main System window.
Need help?
Do you have a question about the ARTIST ELITE 5000 Series and is the answer not in the manual?
Questions and answers