Figure 2-31 Sequence Edit Window; Figure 2-32 Sequence Window; Figure 2-33 Sequence Edit Window - Honeywell HREP16 User Manual

Document 800-06847 Rev B
08/10
Figure 2-31 Sequence EDIT Window
2. Click MODIFY. The Sequence window opens.
Figure 2-32 Sequence Window
3. Right-click on a step in the sequence, then choose to modify it, to delete it, or to
cancel this action.
4. Make the changes, then click CONFIRM. Click CLOSE to close that sequence.
Deleting a Sequence
1. Double-click in the List column the sequence you want to delete.
The EDIT window appears.
Figure 2-33 Sequence EDIT Window
2. Click DELETE. That sequence disappears from the list of sequences.
Configuring the Spot-Out Display
This DVR has a single spot monitor output. You can assign the SPOT OUT display for each
channel. Using this screen, you can configure which cameras are displayed at the spot
output.
1. Click SPOT OUT on the left side of the DISPLAY window. The SPOT OUT menu
appears.
HREP Color Digital Video Recorder User Guide
45