Table of Contents
Advertisement
Installation
42
Figure 2-26
DISPLAY MONITOR Menu
Use the
to change the following values:
SEQUENCE DWELL
SPOT DWELL
DE-INTERLACED MODE
ALARM POP-UP MODE
ALARM POP-UP DWELL
MOTION POP-UP MODE
MOTION POP-UP DWELL
Configuring the Display Sequence
Click SEQUENCE on the left side of the DISPLAY window. The SEQUENCE menu appears.
Choose how long each screen is displayed in a
sequence.
Choose how long each screen is displayed on the
spot monitor outputs.
Set to ON when recording any channels in D1
resolution (704x576) to prevent shudder during
playback.
Set to ON so that the associated channel displays in
full screen when an alarm is triggered.
Choose how long the full-screen popup displays
after an alarm is triggered. If the alarm condition
continues, then the popup screen displays
constantly.
When set to ON, motion detection causes the
associated channel to display full screen.
Choose how long the full-screen popup displays
after motion detection. If motion continues, the
popup screen displays constantly.
Advertisement
Table of Contents
