Chapter 5. Browser Operation; Overview - ATEN ALTUSEN SN0108 User Manual

Overview

Once you have logged in and the Main Screen appears (see The SN0108 /
SN0116 Main Screen, page 14).The bar along the left side is used to configure
and control access to each of the SN0108 / SN0116's COM ports. The functions
of each of the buttons is described in the following table:
Button
All
All
Administrator
and Permitted
Users
All
Authorization
Clicking this button brings up the Serial Port
Status screen. This is the same screen that
displays after a log in. Users can see the status of
each of the devices attached to the SN0108 /
SN0116's COM ports.
Clicking this button brings up the Telnet page.
This page allows the administrator and all users
to open telnet sessions to connect to the devices
attached to the SN0108 / SN0116's COM ports.
See p. 41 for details.
This page allows the administrator and users with
configuration permission (see User Management,
page 31), to set up the COM port parameters for
each of the SN0108 / SN0116's COM ports
(see Port Config, page 26).
This button has two effects depending on
whether the administrator or an ordinary user
clicks it:
The administrator can use this function to
Create, Edit, and Delete user profiles
(see User Management, page 31, for details).
Ordinary users can only use this function to
change their passwords and personal
information (see p. User Manager, page 45).
Note: Operators who have logged in via a
RADIUS server (see RADIUS Settings:, page 19)
can view User Manager information, but cannot
make any changes to that information.
Browser Operation
Function
(Continues on next page.)
Chapter 5
39