Hsm Summary Table; Factory Default Hotkey Settings - ATEN CM0264 User Manual

CM0264 User Manual

HSM Summary Table

Key
[H] Toggles between the default ([Num Lock] [-]) and alternate ([Ctrl]
[F12]) HSM invocation keys.
[T] Toggles between the default ([Scroll Lock] [Scroll Lock]) and
alternate ([Ctrl] [Ctrl]) Port Switching keys.
[F1] Resets keyboard and mouse for operating systems that do not
support USB 2.0
[F2] Enables Mac keyboard emulation.
[F10] Disables keyboard emulation and activates pass through keyboard
mode.
[F4] List the current switch settings via the paste function of a text editor.
[F5] Performs a USB keyboard and mouse reset.
[F6] [nn] Sets the keyboard language.
[Enter]
Note: nn is a two digit number that represents one of the following
keyboard language codes: US English 33; French 08; Japanese 15.
[B] Enables/disabled the buzzer.
[X] [Enter] Enables/disables the port switching keys.
[R] [Enter] Resets the hotkey settings to their default status.
[u][p][g][r][a][d][e] Invokes Firmware Upgrade Mode. See The Firmware Upgrade
[Enter]
Utility, page 47 for full details.
[D] Invokes Video DynaSync, ATEN's exclusive technology that
eliminates boot-up display problems and optimizes resolution when
switching between ports.
[N] Enables/disables keyboard emulation.
[M] Enables/disables mouse emulation.
[W] Enables/disables cursor shift function. This is only available when
using two displays. See Cursor Shift, page 44 for details.

Factory Default Hotkey Settings

For a full list of the CM0264's factory default hotkey settings, see Factory
Default Hotkeys and Settings, page 62.
32
Function